|
1.
|
New methods for corrosion testing of aluminum alloys
by Agarwala, Vinod S;
Ugiansky, G. M.
-- International symposium on corrosion testing of aluminum alloys San Francisco 5/21/1990;
Sponsored by ASTM Committee G-1.
Publisher: Philadelphia ASTM 1992Availability: Items available for loan: Central Library, BUET [620.186/INT/1992] (2).
|
|
2.
|
Rapidly solidified powder aluminum alloys
by Fine, Morris E;
Starke, E. A.
-- Symposium on Rapidly Solidified Power Alluminum Alloys;
Sponsored by ASTM Committee B-9 .
Publisher: Philadelphia ASTM Publication 1986Availability: Items available for loan: Central Library, BUET [669.722/SYM/1986] (2).
|
|
3.
|
Age-Hardenable Aluminium Alloys
by Kovács, István.
-- 4th International Conference on Age-Hardenable Aluminium Alloys 05/01/1986 Visegrád, Hungary;
Organized by the section of metal physics.
Publisher: Switzaland Transteck Publications 1987Availability: Items available for loan: Central Library, BUET [669.722/INT/1987] (1).
|
|
4.
|
Forming Alcoa aluminum
by -- Aluminum Company of America Edition: 1st ed. Publisher: Pittsburgh Aluminum Company of America 1961Availability: Items available for loan: Central Library, BUET [739.57/ALU/1962] (1).
|
|
5.
|
Treatment of liquid aluminum-silicon alloys
by Gruzleski, John E;
Closset, Bernard M.
-- American Foundrymen's Society Edition: 1st ed.Publisher: Des Plaines, llinois American Foundrymen's Society 1990Availability: Items available for loan: Central Library, BUET [669.722/GRU/1990] (1).
|
|
6.
|
Effects of copper and nickel on the structure and properties of heat treated AI-6Si-0.5Mg alloy
by Abul Hossain.
Publisher: Dhaka Materials and Metallurgical Engineering, BUET 2014Online Access: Click here to access online Availability: Items available for loan: Central Library, BUET [669.722/ABU/2014] (1).
|
|
7.
|
Investigation of crack-closure prediction models for fatigue in aluminum alloy sheet under flight-simulation loading
by Padmadinata, Utama Herawan.
Edition: 1st ed.Publisher: Geboren to purwakata Indonesia 1990Availability: Items available for loan: Central Library, BUET [629.133/PAD/1990] (1).
|
|
8.
|
Finite element analysis of modified high strength aluminium alloys using progressive failure algorithm
by Faisal Hossain, Md.
Publisher: Dhaka Department of Materials and Metallurgical Engineering, BUET 2020Online Access: Click here to access online Availability: Items available for loan: Central Library, BUET [669.722/FAI/2020] (1).
|
|
9.
|
Effect of copper to magnesium ratio on precipitation induced anisotropy during ageing of recrystallized Al-Zn-Mg-Cu alloy
by Jasim Uddin, Md.
Publisher: Dhaka Department of Materials and Metallurgical Engineering, BUET 2020Online Access: Click here to access online Availability: Items available for loan: Central Library, BUET [669.722/JAS/2020] (1).
|
|
10.
|
In situ aluminium based dual matrix hybrid composite through powder metallurgy route for automotive industries
by Tasratur Reaj Neha.
Publisher: Dhaka Department of Materials and Metallurgical Engineering, BUET 2023Online Access: Click here to access online Availability: Items available for loan: Central Library, BUET [669.722/TAS/2023] (1).
|
|
11.
|
Tailoring properties of stir cast a356-tib2 in-situ composites
by Rebeka Sultana, Mst.
Publisher: Dhaka Department of Materials and Metallurgical Engineering, BUET 2023Availability: Items available for loan: Central Library, BUET [669.722/REB/2023] (1).
|