• Design and analysis of a pipeline system for optimal transmission of natural gas from proposed payra LNG terminal to the southwestern zone of Bangladesh 

  Didar Hossain, Mohammad (Department of Petroleum and Mineral Resources Engineering, BUET, 2022-12-03)

  Bangladesh has set a target to become a high-income country by 2041. Industrialization and job creation are the key factors for its steady growth and development. For industrialization, the country needs a reliable and ...
• Comparative study of power delivery by water, air, SC-CO2 and foam during drilling operation by coiled tubing method 

  Aminur Rahman, Md. (Department of Petroleum and Mineral Resources Engineering, BUET, 2023-01-28)

  Coiled tubing drilling has become one of the most emerging technological developments and a preferred technique in oilfields. Drilling fluid is required to provide sufficient power to the drilling motor and downhole drill ...
• Capacity analysis of transmission pipeline For sustainable gas supply to Shahjibazar industrial area 

  Deen, Mohammad (Department of Petroleum and Mineral Resources Engineering, 2022-12-03)

  In 2011-12, Jalalabad Gas Transmission and Distribution System Limited (JGTDSL) constructed about 6 km; 10"/8" diameter transmission line from Shahjibazar TBS to provide gas connection to PRAN-RFL. Later, JGTDSL constructed ...
• Determination of optimum production and development strategy for Salda Nadi gas field by simulation technique 

  Aliur Rahman, Md. (Department of Petroleum and Mineral Resources Engineering (PMRE), BUET, 2022-02-01)

  Saldanadi Gas Field was discovered by BAPEX in 1996. Initially two gas sands were discovered and production was commenced with 2 wells, Saldanadi – 1 and 2. Later on 2 more were drilled. Although, the Gas initially in place ...
• Background analysis and development of a lubricating oil management system for Bangladesh 

  Rezaul Hoque, Md. (Department of Petroleum and Mineral Resources Engineering(PMRE). BUET, 2019-09-01)

  Lubricating oil is called the ‘Blood of an engine and machine’. The performance, desired service life, energy-economic efficiency of an engine and machine depends on quality of lubricants. However, adequate codes and ...
• Design of a vapor recovery unit for hydrocarbon Recovery from storage tank and off-gas of a Condensate fractionation plant 

  Maruf-Ur-Rahman, Mohd. (Department of Petroleum and Mineral Resources Engineering(PMRE). BUET, 2020-12-28)

  A condensate fractionation plant recycles vapors coming from the tank batteries and the fractionation column by a vapor recovery unit (VRU). Otherwise, these valuable hydrocarbons would be lost through flaring or venting. ...
• CFD modelling of drill cuttings transport efficiency in annular bends effect of hole eccentricity and rotation 

  Nur Alam Zico, M (Department of Petroleum and Mineral Resources Engineering(PMRE). BUET, 2021-10-01)

  Increasing the cuttings transport performance in deviated wells is difficult due to the rolling transport and cuttings settling on the low side of the annulus. Insufficient cuttings transport may lead to some crucial ...
• Production optimization of a natural gas field considering different options including gravel pack design of sand producing well 

  Towhidul Islam, Muhammad (Department of Petroleum and Mineral Resources Engineering(PMRE). BUET, 2021-02-01)

  The study focuses on the utilization of Integrated Production Modeling (IPM) of Subjected Gas Field located in South-Eastern region of Bangladesh. The gas filed has five wells while four are producing with a processing ...
• Computational fluid dynamics study of lost circulation phenomenon in naturally fractured reservoirs 

  Faysal Ahammad (Department of Petroleum and Mineral Resources Engineering (PMRE), BUET, 2018-03-01)

  Natural Fractures play an important role in oil and gas industry because of their capability of providing pathway for hydrocarbon flow in geologic formations. Fractures connect pores together, therefore, enhance the oil ...
• Print Feasibility study of intelligent pigging in the ring main transmission line of Chattogram 

  Refat Noushad Bhuiya, Muhammad (Department of Petroleum and Mineral Resources Engineering, BUET 2019, 2019-03-09)

  The project work is intended to establish the appropriateness of intelligent pigging as a single integrity assessment tool for the ring main natural gas transmission line of Chattogram city. For the purpose of the project ...
• Remote monitoring and intelligent controls of cathodic protection system of gas transmission pipelines 

  Das, Biplab Chandra (Department of Petroleum and Mineral Resources Engineering, (PMRE), BUET, 2017-12-31)

  This project involves development of a remote monitoring and intelligent control (RMIC) of Cathodic Protection (CP) system of high pressure gas transmission pipelines operated by Gas Transmission Company Limited (GTCL). The ...
• Prospect of LNG use in current Bangladesh market 

  Masudur Rahman (Department of Petroleum and Mineral Resources Engineering, (PMRE), BUET, 2018-09-01)

  Bangladesh is aspiring to reach the middle-income country status by 2021 and a developed country by 2041.Industrialization and job creation are the key challenges for country’s steady growth rate and development. For ...
• Analysis of wellbore instability while drilling exploratory wells in Bangladesh 

  Evana Tinny (Department of Petroleum and Mineral Resources Engineering, (PMRE), BUET, 2018-03-13)

  Wellbore instability is one of the most prevalent downhole challenges since oil well drilling began. The difficulties become more profound and unpredictable when the wells are exploratory. Wellbore Instability issues related ...
• Design of a water treatment system for beneficial use of the produced water in a gas field in Bangladesh 

  Mehedi Hasan, Md. (Department of Petroleum & Mineral Resources Engineering (PMRE) , BUET, 2018-03-10)

  Produced water is water trapped in underground formations that is brought to the surface along with oil or gas. It is by far the largest volume byproduct or waste stream associated with oil and gas production. Produced ...
• Determination of the critical drawdown pressure to predict potential risk of sand production of a gas well in Bangladesh 

  Kaoser Hasan, Md. (Department of Petroleum & Mineral Resources Engineering (PMRE) , BUET, 2016-06)

  Sub-surface formations are always in a stressed state, mostly due to overburden and tectonic stresses. When an oil or gas well is drilled into a formation, stressed solid material is removed. The fluid pressure of the ...
• Health, safety and environment (HSE) culture in Bangladesh challenges and recommendation 

  Enamul Kibria, Md. (Department of Petroleum and Mineral Resources Engineering (PMRE), 2016-10)

  With rapid growth of national economy and strong social needs, energy has become an important strategic resource for national development. Although Bangladesh government is making great efforts to develop sustainable ...
• Feasibility study of a second oil refinery in Bangladesh 

  Prodip Kumer Chowdhury (Department of Petroleum and Mineral Resources Engineering (PMRE), 2010-04)

  Eastern Refinery Limited is the only Petroleum Refining Company in Bangladesh which was established in 1968. Its installed capacity is 1.5 million MT. But now it can hardly process 1.3 million MT due to its aging effect. ...
• Enhanced vapor recovery modeling of condensate tank flaring system coupled with existing vapor recovery unit in Bibiyana gas field 

  Saha, Palash Khanti (Department of Petroleum and Mineral Resources Engineering (PMRE), 2012-04)

  The Bibiyana gas field is one of the most prolific gas fields in Bangladesh. It stared production in March, 2007 with 200 MMSCFD. Production has steadily increased from this field, and currently it is producing more than ...
• Reservoir simulation of Haripur gas field to analyze the field performance by production and pressure history matching 

  Nath, Fatick (Department of Petroleum and Mineral Resources Engineering (PMRE), 2010-11)

  Well-7 of Haripur gas field was spud in 1986 by BAPEX. After 07 years of uninterrupted oil production, the well ceased its production on 14th July, 1994. The 1st work over of Sylhet well -7 was completed in March 2005. ...
• Design of an ideal gas regulating and metering station for gas supply to A 50 MW power plant 

  Mahbub Hossain, Mohammad (Department of Petroleum and Mineral Resources Engineering (PMRE), 2009-12)

  In gas transmission and distribution system, the gas pressure and flow rate are controlled by using CGS, TBS, DRS and RMS. It is important to supply uninterrupted gas at a desired pressure and flow rate to the customer ...

View more