Dissertations/Theses: Recent submissions

  • Finite element formulation and modeling of rate dependent response of natural and high damping rubbers 
    Tanvir Hossain (Department of Civil Engineering (CE), BUET, 2008-02)
    Nonlinear rate-dependent responses of natural rubber (NR) and high damping rubber (HDR) are simulated by solving boundary value problems modelled with three dimensional 8-noded brick finite elements. The FE formulation ...
  • Modeling thermal effluent of a power plant and its effect on water quality of the Sitalakhya river 
    Tanvir Ahmed (Department of Civil Engineering (CE), BUET, 2005-07-05)
    The River Sitalakhya receives pollutants from various sources. It is a source of water for domestic and industrial water supplies and a centre of numerous activities in the region. The river receives thermal discharges ...
  • Comparative study of the analysis technique of mat foundation 
    Reza Hossain, Tahsin (Department of Civil Engineering (CE), BUET, 1993-11)
    Mat foundations are becoming increasingly popular in the construction of highrise buildings as they are usually found to be economical in cases where the base soil has a low bearing capacity and/or the column loads are ...
  • Evalution of air passenger service quality in Bangladesh 
    Tahmina Sultana (Department of Civil Engineering (CE), BUET, 2009-09)
    The air transport is required high professional in work to ensure safety, exactly and fast which are outstanding advantages of traveling passenger by air. Service quality then becomes significantly important factor to ...
  • Effect of shear wall on behaviour of mat foundation 
    Imam, Syed Zubair (Department of Civil Engineering (CE), BUET, 2003-07)
    Mat foundation is widely used for high-rise buildings where presence of shear wall is very common. But the available analysis and design methods do not properly focus on the effect of shear wall on the behaviour of mat ...
  • Concrete Mix Design Procedure Using Locally Available Materials 
    Warda Bint Ashraf (Department of Civil Engineering (CE), BUET, 2012-06-06)
    Concrete is the most popular and widely used construction material in Bangladesh. It can be produced form locally available materials which make the product-cost lower than the others. Concrete mix design works as a major ...
  • Study of the dynamic behabiour of the Jamuna multi-purpose bridge under different seismic and vehicular loading 
    Zillur Rahman, Syed (Department of Civil Engineering (CE), BUET, 2008-07)
    The Jamuna Multipurpose Bridge is the longest and most important bridge in Bangladesh which has established the long cherished road link between the East and West of Bangladesh. The bridge is located il} a seismically ...
  • Uplift behaviour of horizontal anchor plates in sands 
    Rajab Ali, Syed (Department of Civil Engineering (CE), BUET, 2001-12)
    In this research a series of anchor pull out test are performed in the laboratory. These tests are done using various types of sand at different density. In this project work, three types of sands have been collected ...
  • Improved design approach for mat foundation with variable thickness 
    Mizanur Rahman, Syed (Department of Civil Engineering (CE), BUET, 2001-07)
    The current practice in the design of mat foundation is to provide it with constant thickness. Analysis of mat foundation and study of the results reveal that mat foundation is extensively over-designed in the current ...
  • Rational design of simply supported and continuous deep beams 
    Mymur Sultan, Syed Md. (Department of Civil Engineering (CE), BUET, 2000-09)
    Deep beam is a very important structural element in various types of concrete structures such as pile cap, transfer girder, panel beams, foundation walls of rectangular tanks and bins, shear walls, folded plate roof ...
  • Study of road accident on selected highways in Bangladesh 
    Manzur Elahi, Syed (Department of Civil Engineering (CE), BUET, 1986-08)
    For abstracts please see full text
  • Geotechnical characteristics of Dhaka clay 
    Syed Fakhrul Ameen (Department of Civil Engineering (CE), BUET, 1985-07)
    In this research change in undrained shear strength 5u due to swelling under ko and isotropic stress conditions is investigated for remoulded Dhaka clay, collect~dfrom BUET campus. The remoulded samples were prepared ...
  • Industrial pollution problems in Bangladesh 
    Azizul Haq, Syed (Department of Civil Engineering (CE), BUET, 1989-08)
    Bangladesh is mainly an ogricultural'country but In recent years the process of industrialization is rather rapid under the industrial policy of the government. The environmental pollution problem in Bangladesh is being ...
  • Improved Systems for Seismic Design of Buildings with Soft Ground Storey 
    Mondal, Swarnendu Shekhar (Department of Civil Engineering (CE), BUET, 2008-03-25)
    Due to the demand of various facilities like open utility or parking space, open ground storey has become a typical feature in the modern multi-storey construction in urban areas. This causes vertical stiffness irregularity ...
  • Creep characteristics of concrete made of brick chips in Bangladeshi environment 
    Roy, Sushanta (Department of Civil Engineering (CE), BUET, 2012-03)
    To study the effect of brick chips as coarse aggregate on creep behavior of concrete, a comprehensive testing program is conducted at Bangladesh University of Engineering & Technology, Dhaka, Bangladesh. Concrete cylinder ...
  • Effect of mechanical mixing and dung concentration on biogas generation 
    Bosu, Sushanta Kumar (Department of Civil Engineering (CE) , BUET, 1993-02-11)
    This study investigates the effect of mixing and cow dung concentration on biogas production in batch scale study. Mixing of slurry is one of the basic requirements for better performance of a digester, But the existing ...
  • Analysis of spine beam bridge desk 
    Acharjee, Susankar Chandra (Department of Civil Engineering (CE), BUET, 1989-05)
    For abstracts please see full text
  • VHDL based modeling and design of parameterizable multipliers for testability 
    Arif Shams, Shaikh (Department of Electrical and Electronic Engineering (EEE), BUET, 1998-08)
    Full custom design of VLSI circuits is very time consuming and costly. Such a - design for a target process cannot be reused for fabrication even in a scaled down version of the same process. This makes the approach less ...
  • Adsorption-desorption characteristics of arsenic on agricultural soil 
    Sultana Rebeka Akhter (Department of Civil Engineering (CE), BUET, 2006-12-27)
    Accumulation of As on paddy field soils as a result of irrigation with As contaminated groundwater and its introduction into the food chain are major concerns. Adsorption is the principal mechanism by which As is accumulated ...
  • Removal of microorganism an suspended material by coagulation and filtration 
    Sultana Naznin Afroze (Department of Civil Engineering, BUET (CE), 1998-04)
    The quality of water is of vital concern for mankind since it is directly linked with human welfare. But majority of people are still not aware of it. People use surface water for various domestic purposes. Surface water ...

Search BUET IR


Advanced Search

Browse

My Account