Dissertations/Theses: Recent submissions

  • Analysis of temperatue dependence of nitride-based quantum cascade detectors 
    Saniul Haq, A. F. M. (Department of Electrical and Electronic Engineering, 2014-07)
    QCDs are emerging technology which has shown to encompass wavelengths from near-infrared to the THz region. The design of QCDs has proven to be robust and reliable. Especially in the MIR range around 4 to 16 m, ...
  • Simulation of kailashthilla ii gas processing plant 
    Kamruzzaman, Sarker (Department of Chemical Engineering, BUET, 1999-04)
    Simulation of the Kailashtilla II gas processing plant (at Golapganj, Sylhet) has been undertaken using the Hyprotech's standard simulator 'HYSIM'. First, the simulation of the gas processing plant has been performed to ...
  • Study of gas hold-up in aqueous solutions of surface-active solutes 
    Jahangir Reza, Mohammod (Department of Chemical Engineering, BUET, 2005-08)
    The gas hold-up is an important hydrodynamic parameter that affects the interfacial area of gas-liquid dispersions. The ability of liquid phase to support or hinder bubble coaJescence significantly influences the gas ...
  • New model for prediction of tray efficiency in cross flow sieve trays 
    Fatema Begum (Department of Chemical Engineering, BUET, 2007-08)
    A new simplified model for predicting mass transfer efficiency on a commercial scale sieve tray has been developed. The model is based on the analysis of tray hydrodynamics on a cross flow sieve tray. It considers the ...
  • Study of submerged air jets in liquids 
    Ashfaq Mohammad Ansery (Department of Chemical Engineering, BUET, 2009-04)
    Submerged gas injection has attracted much attention due to its wide range of application in different processes. A number of numerical analysis has been made to investigate the stability of submerged air jet in liquids. ...
  • Study of erosion - corrosion under impingement by a fluid jet 
    Bayzid Kabir, Kazi (Department of Chemical Engineering, BUET, 2009-08)
    Influence of flow on corrosion behavior of stainless steel, brass and aluminum wa,~ studied using electrochemical measurement techniques. Flow effect was identified by comparing erosion~corrosion situations with pure ...
  • Processing and characterization of waste denim fiber reinforced polymer composites 
    Mobashera Saima Haque (Department of Materials and Metallurgical Engineering, 2014-09)
    In this research, polymer matrix composites of denim fiber reinforcements with a view to recycling the wastes from garments industries are studied. Polypropylene matrix based composite structures were prepared by using ...
  • Review and comparative study of network monitoring tools in linux 
    Rehana Begum (Institute of Information and Communication Technology, BUET, 2002-10)
    For abstract please see full text
  • Development of an e-tendering system for an organization 
    Shahadot Hossain, Md. (Institute of Information and Communication Technology (IICT), 2013-10)
    Tendering is widely used in all over the world in all business areas such as, purchasing goods, seeking service provider, construction business etc. It is one of the fairest means of awarding contracts. Thousands of ...
  • Software development for a modern E-shop in Bangladesh 
    Monsur Ahmed (Institute of Information and Communication Technology, BUET, 2006-11)
    The subjeet that is expected to influence the future growth of the Internet and other forms of interaetive communication is electronic commerce. This application of information technology perhaps best embodies the explosion ...
  • Development of a web-based transport management system of a company 
    Edi Amin, Muhammad (Institute of Information and Communication Technology, BUET, 2009-11)
    The use of different types of vehicles in organizations has drastically increased over the years. Consequently the management of these vehicles has become more complicated than ever. The combined or stand alone use of ...
  • Development of a web-based result processing system for higher secondary educational institution in Bangladesh 
    Hasibul Hossain, Muhammad (Institute of Information and Communication Technology, BUET, 2009-08)
    Processing of examination results is one of the most important activities of a school. Generally this processing depends on different parameters in many ways and thus processing becomes a tough task. Some computer ...
  • Development of management information system on social compliance in RMG sector using open source system architecture 
    Alauddin Ahmed (Institute of Information and Communication Technology, BUET, 2009-04)
    In addition to price and quality of the product, and delivery period, all major garment buyers, nowaday, have set their business policies focusing on compliance of factories with their corporate code of conduct. Hence, ...
  • Robust and reliability-based design optimization under epistemic uncertainty 
    Dey, Prithbey Raj (Department of Industrial and Production Engineering, 2015-01)
    This thesis proposes formulations and algorithms for robust design optimization with uncertainty representation and propagation considering both aleatory (e.g. produced due to natural variability) and epistemic (e.g. ...
  • Efficient method of person verification using hand geometry 
    Osiur Rahman, Mohammad (Institute of Information and Communication Technology, BUET, 2005-10)
    Hand Geometry is one of the relatively new physiological biometrics used for verification of a human being due to its stable and unique characteristics. There are few open literatures addressing the research issues ...
  • Effects of chromatic dispersion and self - phase modulation on optical transmission system 
    Karmaker, Bijoy Kumer (Institute of Information and Communication Technology, BUET, 2009-10)
    At high bit rate chromatic dispersion (CD) is a dominant factor that limits the transmission distance. Moreover, in long distance transmission high input power is required to overcome the loss encountered by fiber ...
  • Impact assessment of introducing 4G technology for wireless communication in Bangladesh 
    Monirul Hoque, Mohammad (Institute of Appropriate Technology (IAT), 2014-08)
    New era of wireless communication is upon us. The approaching 4G (fourth generation) mobile communication systems are projected to handle higher data rates and mobile internet for rich media collaboration allowing faster ...
  • Development of an FPGA module for digital laboratory-on-a-chip 
    Shamsul Alam, Muhammad (Institute of Information and Communication Technology, BUET, 2007-04)
    Recently Field Programmable Gate Array (FPGA) has attracted the attention of educators and it is being used extensively in engineering education. FPGA-based education and research requirc almost no mIming cost as it can ...
  • MHD effect on double diffusive mixed convection in a lid driven trapezoidal enclousure for unsteady flow 
    Borhan Uddin, Md. (Department of Mathematics, 2015-01)
    The effect of magnetic field on unsteady double diffusive mixed convection in a lid driven trapezoidal enclosure with uniformly (case-1) and non-uniformly (case-2) heated and concentrated bottom wall has been explored ...
  • Development of a SMS based remote diabetes monitoring system 
    Mosharraf Hussain, Md. (Institute of Information and Communication Technology, BUET, 2008-07)
    Blood glucose monitoring is crucial to control diabetes. Daily blood glucose monitoring is very important to reduce the risk of complications and improve the quality of life. Thus, regular measurement of blood glucose ...

Search BUET IR


Advanced Search

Browse

My Account