The purpose of this study is to understand the electrospinning behaviour of cellulose acetate (CA) in different solvents and its subsequent modification and functionalization with polyethylene glycol (PEG) and silver nitrate ...

A visible light active TiO2 - Bi0.9Ho0.1FeO3 nanoparticles composite thin films with different mol. % of Bi0.9Ho0.1FeO3 were successfully prepared via non-aqueous sol-gel method. The incorporation of 5, 10 and 20 mol. % ...

In recent years, conductive polymer nanocomposites (CPNC) have attracted the considerable attention from worldwide researchers due to their wide range of applications. Presently, conducting polymer composites are being ...

Lithium ion batteries are currently the most popular power source for the enormous varieties of portable electronic and electrical devices worldwide. The volume of such batteries after the end of service life and the ...

Initiative of development and characterization of Pb free high temperature solders was taken. Two systems such as Zn-xMo (x= 0.4, 0.6 and 0.8 wt% Mo) and Zn-xCr (x= 0.2, 0.4 and 0.6 wt% Cr) were chosen for this study. ...

Mini steel of mills or plants in Bangladesh melt scraps in Induction Furnaces. Very little refining the liquid steels is possible in these induction furnaces. In many plants the molten steels are cast into what are usually ...

In multiferroic materials, the grain size is an important factor for both ferroelectric and ferromagnetic phases. This research thus aimed at fabricating xBaTiO3 (BTO)/(1- x)Ni0.6Zn0.4Fe2O4 (NZFO) (where, x=0.7, 0.8 and ...

The role of codoping with La in Bi-site and Ta in Fe-site on the multiferroic properties of BiFeO3 ceramic has been investigated in this research. Single phase Bi0.8La0.2Fe1-xTaxO3 (BLFTO) ceramics with x = 0.0, 0.01, 0.03 ...

A systematic study has been carried out in the current study to investigate the mechanical (tensile strength, Young’s modulus and strain to failure) and physical properties (SEM, FTIR and TGA) of jute, bamboo and coir ...

Zinc ash is a discarded material of galvanizing plant and consists mostly of oxidized zinc that forms on the surface of molten zinc metal in galvanizing pot. The ash is removed from the top of galvanizing baths by skimming ...