• Effect of high-pressure coolant on milling Ti-6Al-4V alloy with external rotary liquid applicator 

  Nazma Sultana, Mst. (Department of Industrial & Production Engineering,( IPE) BUET, 2023-08-09)

  An effective cooling approach with appropriate process parameters can enhance the machinability as well as productivity. In this regard, this study focuses on enhancing the machinability of widely used Ti-6Al-4V alloy with ...
• Risk assessment in LPG chain: a case study 

  Munsur, Zisan (Department of Industrial & Production Engineering (IPE), BUET., 2023-08-05)

  Liquified petroleum gas (LPG) plays a vital role inthe energy sector throughout the world and in Bangladesh. However, the Post-COVID-19 era and the ongoing Russia-Ukraine war caused energy supply disruption globally. The ...
• Automation of repetitive manual process work using robotic process automation at a mobile network operator 

  Sifat Hossain, Md. (Department of Industrial & Production Engineering, 2023-04-01)

  At present, all the enterprise businesses both from global and local perspective, especially telecommunication industry are facing challenge to keep pace with evolving technology. Thus, business organizations in today’s ...
• Investigation of physico-mechanical properties of areca-cotton fiber reinforced polypropylyne composite 

  Roy, Gourab Kumar (Department of Industrial & Production Engineering,(IPE), BUET, 2023-07-30)

  The goal of the current research is to fabricate fiber reinforced composite with comparatively easy to get materials, which comes as byproduct and determine the mechanical, physical, chemical and thermal characteristics ...
• Developing a machine learning model for predicting purchasing behavior of F-commerce-based customer 

  Mehnaz, Fatema (Department of Industrial & Production Engineering (IPE)., 2022-11-12)

  The modern tech-based lifestyle has become much easier with online purchases. Social media platforms like Facebook, Instagram and Twitter have taken it to another level. Online business through Facebook is now a significant ...
• Exploration of the drivers of solar energy development in Bangladesh: a muticriteria decision making approach 

  Zahidul Anam, Md. (Department of Industrial & Production Engineering (IPE)., 2022-09-13)

  Energy demand in Bangladesh is consistently rising due to the country’s rapid population growth and economic expansion. As a result, solar energy holds substantial potential in the Bangladeshi energy portfolio. This study ...
• Supply chain risk assessment in the refrigerator industry of Bangladesh: a case study 

  Mohasin Sarder, Mohammad (Department of Industrial & Production Engineering (IPE)., 2021-09-26)

  Risk exists in various fields of research like finance, manufacturing, healthcare, supply chain management, etc. However, insufficient understanding of uncertain regional differences and various industry trends, have ...
• Study on mechanical and machining performance of carbon nanotube reinforced aluminum metal matrix composite 

  Md. Sazzad Hossain Ador, Md. (Department of Industrial & Production Engineering (IPE)., 2023-04-16)

  In modern material science, engineers are constantly attracting and striving to develop nanohybrid Aluminum based Metal Matrix Composite (AMMC) materials due to their outstanding tribological, microstructural and mechanical ...
• Identification and analysis of barriers of TPM implementation using total interpretive structural modeling approach: a case study 

  Miftahul, Jannat Chowdhury (Department of Industrial & Production Engineering (IPE)., 2022-09-28)

  Bangladesh is already entered in the era of modern industrialization, even preparing to enter the 4IR (4th Industrial Revolution). So, we are becoming more export oriented. Above 80% of our export products are ready-made ...
• Investigation of the effects of eco-friendly nanofluids through minimum quantity lubrication in grinding metal matrix composite 

  Ashab Shakur, Md. (Department of Industrial & Production Engineering (IPE)., 2023-04-29)

  The unique physical features and reliability of advanced composite materials have attracted interest in recent years. Aluminum MMCs reinforced with SiC particles (Al/SiC-MMC) exhibit a yield strength increase of up to 20%, ...
• Modelling hierarchical structure for circular supply chain in readymade garment industry 

  Roy, Sanjeeb (Department of Industrial & Production Engineering (IPE)., 2023-06-07)

  In response to the happening environmental degradation and occurrences of natural disasters like Covid-19 and man-made disasters like Russian-Ukraine war, some international non-profit organizations along with manufacturing ...
• Synthesis and characterization of surface modified CNT reinforced PVA nanocomposite films 

  Moon, Mahjabin (Department of Industrial & Production Engineering (IPE)., 2023-06-11)

  Polymers have been ruling the packaging market for decades because of their versatility, lightness, availability, strength, easy manufacturability, and low cost. Overusing non-biodegradable plastics in food packaging has ...
• Effects of minimum quantity lubrication with water-based nanofluid on machinability of hardened steels 

  Ahmed, Md. Tanvir (Department of Industrial & Production Engineering (IPE)., 2023-04-30)

  Machining of hardened steels at room temperature has always been a challenge due to the generation of excessive cutting force which eventually results in increase in tool wear that makes the machined surface rough. To ...
• Investigation of wettability and droplet energetics on micro-scale wavy and v-grooved surfaces 

  Khan, Md. Ikram (Department of Mechanical Engineering (ME), 2022-04-26)

  In order to develop micro-structured surfaces with tunable wetting properties, it is critical to understand the relationship between the surface roughness and wetting state. Basic research on developing hydrophobic surfaces ...
• Prediction and optimization of machining parameters in turning of Ti-6Al-4V super alloy using machine learning techniques 

  Shovon Zahid, Md. (Department of Industrial & Production Engineering (IPE)., 2021-12-21)

  The machining of high temperature metals is rising in various industries. Despite its difficulty in machining, titanium and its alloys are widely used in various industries due to its exceptional strength-to-weight ratio ...
• Analysis of operational hazards in heavy fuel oil-based power plants: a hybrid multi-criteria decision-making approach 

  Siraj, Md. Tanvir (Department of Industrial & Production Engineering (IPE)., 2022-09-14)

  Hazard identification and prioritization practices are very important for power plants to continue their operations without disruption. Systematic operational hazard analysis is not a very common practice at the Heavy Fuel ...
• New approach to robustness-based optimization with probabilistic representation of uncertainty set constructed using machine learning 

  Shahbab, R. M. (Department of Industrial and Production Engineering, BUET, 2022-09-18)

  A machine learning prediction-based uncertainty set construction method is developed for capturing the true realization of uncertain variables in robustness-based optimization. A unified probabilistic approach is used in ...
• Emergency resource storage facility location problem considering domino effect after an earthquake 

  Chowdhury, Hasina Tabassum (Department of Industrial Production and Engineering, 2021-03-10)

  In the case of natural disasters, the sufferings of affected people know no bounds. The earth is facing challenges to work for the survival of human being as life become endangered during disasters. Sometimes one natural ...
• Supply chain risk assessment in the home appliance industry: a case study 

  Dey, Palash Kanti (Department of Industrial Production and Engineering, 2021-09-28)

  Currently, home appliance industries of Bangladesh are growing very fast and productively. Bangladesh manufactures and assembles various consumer electronic home appliances in local manufacturing plants. Some of our products ...
• Effects of minimum quality lubrication with nano cutting fluid on surface milling of TI-6AL-4V alloy 

  Shams, Aurpon Tahsin (Department of Industrial and Production Engineering, 2021-06-15)

  Surface Milling is used for making shapes, grooves and pockets in a workpiece surface. In this type of operations high surface quality is highly desirable. Tool life is another machinability index which is increased with ...

View more