| dc.description.abstract |
Slope stability is a critical concern in geotechnical engineering, particularly in regions prone to erosion, shallow failures, and infrastructure instability. This research presents the development of a design methodology for slope stabilization using Vetiver grass and Recycled Plastic Pins (RPP) as a sustainable, cost-effective, and environmentally friendly alternative to conventional stabilization techniques. The study integrates laboratory testing, field monitoring, numerical modeling, and predictive modeling to evaluate the effectiveness of Vetiver and RPP in improving slope stability.
The research begins with soil characterization through laboratory testing, assessing index properties, engineering properties, and chemical characteristics of different soil samples. Three soil types were analyzed: Tahirpur soil, classified as clayey silt with high plasticity, consisting of 84% silt and 16% clay, requiring pH adjustment for optimal vegetation growth. Dacope soil, categorized as lean clay with moderate plasticity, contained 73% silt and 27% clay but exhibited high salinity (ECe = 9 dS/m), making it challenging for plant survival. Chilmari soil, identified as silty sand with 60% sand, 35% silt, and 5% clay.
Field monitoring of Vetiver growth at two sites, Dacope (Khulna) and Chilmari (Kurigram), demonstrated Vetiver’s ability to thrive in saline and nutrient-deficient soils. Survival rates exceeded 75% in high-salinity conditions and reached 95% in sandy soil. Growth data indicated shoot lengths of up to 213 cm and root penetration extending to 70 cm, confirming Vetiver’s strong anchorage and effectiveness in erosion control. To enhance real-time assessment of soil movement, moisture content, and reinforcement performance, an IoT-based monitoring framework was conceptually introduced.
Numerical analysis using PLAXIS 2D was performed to assess the effectiveness of Vetiver and RPP reinforcement. The results were validated against conventional method of slices. A parametric study was conducted to evaluate the influence of slope geometry, soil strength, reinforcement depth, plant age, and spacing on stability. The findings revealed that increasing the slope angle from 20° to 60° led to a 61% decrease in FS, indicating the vulnerability of steeper slopes to failure. Soil cohesion played a crucial role in stability, as an increase from 0 to 20 kPa resulted in a 126% improvement in FS, confirming that cohesive soils provide better stability. The effectiveness of Vetiver reinforcement was strongly correlated with plant age, with a 62% increase in stability observed after two years due to deeper root penetration. Denser Vetiver and RPP spacing configurations contributed to higher FS values, while wider spacing reduced reinforcement effectiveness. The optimal RPP length was determined to be up to 2.0 meters for RPP alone, beyond which additional length yielded diminishing returns, but with vetiver deeper RPP lengths provided additional 16% improvement of FS when length was increased from 2 to 3 meters.
To develop a practical design tool, Multi-Linear Regression (MLR) and Artificial Neural Network (ANN) models were formulated for FS prediction.
A cost analysis demonstrated that Vetiver and RPP reinforcement was significantly more economical than conventional concrete-based stabilization methods, reducing costs by up to 56%. The Vetiver and RPP hybrid system had more cost-to-performance ratio, making it a viable solution for large-scale slope protection projects. |
en_US |