Recently added

Risk analysis of marine accident in inland waterways of Bangladesh using fault tree analysis method

Quraishi, Ehtasham Ahmed (Department of Naval Architecture and Marine Engineering, 2019-05-25)

As a riverine country, the inland waterways of Bangladesh plays a vital role in transportation of goods and personnel throughout the country in all seasons. But these waterways are not guaranteed to be safe for navigation ...

Development of an effective agriculture marketing systemin Bangladesh

Alam, Iftekharul (Institute of Information and Communication Technology, 2019-03-27)

Agriculture is an information intensive industry. This project deals with the marketing process of agro products of Bangladesh where the farmers live in the rural areas and they struggle to earn their living in spite of ...

Acid catalyzed three-component one-pot synthesis of substituted six membered heterocyclic compounds of biological interest

Zannatul Ferdous Sonia (Department of Chemistry, BUET, 2019-07-03)

p-Toluenesulphonic acid is a highly effective and efficient catalyst for the one-pot multicomponent coupling of phenylaminoethylacrylate derivatives, substituted amines and substituted aldehydes in ethanol at ambient ...

Development of an online vehicle management system a case study

Al Nahin, Syed Abdullah (Institute of Information and Communication Technology, 2019-03-09)

The Online Vehicle Management System is a system that enables teachers and employees to book vehicle. It also allows the teachers/employees to view the vehicles schedule. The system was developed for Automobile Shop DAERS, ...

Study on monsoon flood hazard and vulnerability assessment of old-Brahmaputra river floodplain under climate change scenario

Rahman, Afeefa (Department of Water Resources Engineering, 2019-03-24)

This study is formulated to assess the monsoon flood hazard, vulnerability and risk of Old-Brahmaputra River and its surrounding floodplain for future climate change scenario of RCP 8.5 using numerical modeling approach. ...

Optimization model for the vehicle routing problem with simultaneous delivery and pickup under time windows for environmental protection.

Ara, Mst. Anjuman (Department of Industrial and Production Engineering, 2019-02-13)

The distribution of finished products from depots to customers is a practical and challenging problem in logistics management. Better routing and scheduling decisions can result in higher level of customer satisfaction ...

Stochastic modeling of hydrological and meteorological drought in the South-West region of Bangladesh

Husna, Noor-E-Ashmaul (Institute of Water and Flood Management, 2019-01-16)

Drought is a hindering natural disaster that may affect every aspect of living life. It is believed that the trend of the recent climate change has triggered this disaster more than past. In this study, therefore, ...

Appraisal of detailed area plan and development of a revised conceptual plan for Dhaka city

Sarnav Talukder (Institute of Appropriate Technology, (IAT), BUET, 2019-03-30)

Dhaka the capital and largest city of Bangladesh is one of the fastest-growing megacities of the world which is suffering from traffic congestions, waterlogging, housing shortage, pollution, waste management, utility ...

Framework for job evaluation in textile industry: a case study

Hannan, Md. Abu (Department of Industrial and Production Engineering, 2019-03-27)

The main aim of the study was to establish the effect of job evaluation on employee job satisfaction in a renowned knit composite industry. The objective of the study was to investigate how job evaluation affect employee’s ...

Cloud framework for efficient and secured multimedia image communication

Mukta, Jannatun Noor (Department of computer Science and Engineering, 2019-04-24)

Nowadays, each websites and e-commerce sites are designed in a manner that pages can be loaded faster. For faster page loading through optimizing websites, one of the major problems related to images are absence of having ...

Quantitative analysis of industrial carbon emission and strategies for carbon reduction

Sadia Mohsin (Department of Civil Engineering(CE) , BUET, 2019-06-09)

This study intends to estimate carbon emission from energy consuming sources at garments industries in Bangladesh and to represent some strategies for Greenhouse Gas (GHG) reduction i.e. CO2e emission reduction. The thesis ...

Investigation of structural, morphological and electromagnetic properties of scandium doped nickel-copper-zinc ferrites

Harun-or-Rashid, Md. (Department of Physics, BUET, 2019-07-20)

Various polycrystalline Ni0.3Cu0.2Zn0.5ScxFe2-xO4 (x = 0.00, 0.02, 0.04, 0.05 and 0.07) were synthesized by standard solid-state reaction technique. The composition was calcinated at 1173 K and the samples, prepared from ...

Study on black carbon and sulphate aerosols concentrations in and around Bangladesh and its impact on atmospheric variables

Shahada Sultana (Department of Physics, BUET, 2019-07-09)

Atmospheric aerosols have significant local, regional and global impacts. They have the potential to significantly influence the Earth’s climate as they scatter or absorb sunlight. In this study, for the area of Bangladesh ...

Numerical investigation of magnetohydrodynamic mixed convective nanofluid flow in a lid-driven porous cavity with an obstacle of different aspects

Munshi, Mohammod Jahirul Haque (Department of Mathematics, 2018-07-31)

Magnetohydrodynamic mixed convective nanofluid flow in a lid-driven porous cavity with an obstacle of different aspects is investigated numerically. The current geometry is analyzed numerically by finite element method ...

Assessment of hydro-morphological response of selected reach of the Jamuna river due to structural intervention using delft 3D model

Hasan, Md. Zakir (Department of Water Resources Engineering, 2018-09-30)

In this study, an attempt has been made to analyze the hydro-morphological responses of the Jamuna River due to structural intervention in a selected reach by preparing a morphological model. The study reach covers from ...

Synthesis and characterization of bio-degradable starch based graphene nanocomposites

Shafiqul Islam Mollik, Md. (Department of Physics, BUET, 2019-07-09)

Biopolymers with nano-scale fillers based nano-composites have gained significant research interest as an alternative to the conventional plastics. The synthetic plastics are detrimental to health and are a great threat ...

Optimization of irreversible electroporation technique for the study of pore formation in lipid membranes of giant unilamellar vesicles

Kabir Ahamed, Md. (Department of Physics, BUET, 2019-07-23)

Irreversible electroporation (IRE) is a minimally invasive and non-thermal technique in which an ultra-short pulse with high electric field has been found to be successful for ablation of certain tumor and cancer cells. ...

First principles and experimental study on MoS2-BASED nanocomposites for fuel cell application

Hossain, Md. Tanver (Department of Mechanical Engineering, 2019-05-22)

Energy storage via the combination of hydrogen production and fuel cell has been a very active field of research for the last few decades. Nanostructured semiconductor materials are now being utilized for hydrogen production ...

Productivity and quality improvement by implementing line balancing and value stream mapping techniques in leather industry a case study

Tito, Md. Mehedi Hasan (Department of Industrial and Production Engineering, 2019-03-30)

Higher productivity with perfect quality and meeting lead time are the basic concerns for manufacturers. All operational challenges are surrounded to these concerns and prime approaches to achieve customer satisfaction. ...

Design and analysis of reconfigurable photonic crystals and whispering gallery mode resonators based on optical force

Nusrat Jahan (Department of Electrical and Electronic Engineering (EEE), BUET, 2019-08-06)

Photonic crystals (PCs) and whispering gallery mode (WGM) resonators are two of the most versatile photonic structures in the field of photonics and cavity quantum electrodynamics. A long standing challenge in the design ...

Recently added

The Central Library, BUET: Recent submissions

Search BUET IR

Browse

All of IR

My Account